Oak Desk with Embedded TV/Monitor

I've been after a new desk for a while, but never really been able to find one that fits the right combination of size, style and budget.

So I decided to build one myself, taking inspiration from a few videogames, where desks with built-in screens are commonplace:

In Splinter Cell: Blacklist (2013), the 'SMI' as it was known, was interactive and and provided a means of displaying menu systems to the player.

More recently, in Doom (2016), the desk is merely part of the scenery.

The plan
As much as I like the look of the tables in the games, I decided to go with a more traditional look.

The TV (red) will be sunk into the table, with the electronics hidden by the apron (grey) part.	When the glass (blue) is added, it will line up with the table surface, creating a flush finish.
The underside - I envisage a frame, possibly a re-purposed wall mount (yellow/gray), supporting the TV. The pink block indicates where I will mount the computer.

I started with a block of oak kitchen counter top. The aim was to put the TV into the desk, then protect it with a glass worktop sunk into the wood.

Step 1: Routing the ledge for the glass

A photo posted by Anthony (@darkmidnight_diy) on Aug 3, 2016 at 3:12pm PDT

The counter-top is 38mm thick, and has substantial weight to it. The plan was to route 10mm deep into it so that the glass would sit flush with the rest of the wood.

The glass was centered on the table and marked up. I'd only be routing the ledge, I'd be cutting the middle part out entirely, to make room for the screen, so it didn't make sense to rout all that.


I also left the corners - once the middle was removed I'd use a forstner drill to do those, to ensure a nice round corner.


Step 2: Cutting out the middle

A photo posted by Anthony (@darkmidnight_diy) on Aug 7, 2016 at 10:01am PDT

It would be a shame to waste the large chunk of wood from the middle, so I thought I'd use it to create the legs which meant I had to remove it intact.

I did this by using a circular saw to plunge-cut on each side, using the routed ledge as a guide, then using a jigsaw to finish the cuts on each side, allowing the middle to drop out (which of course had to be controlled, leaving it unsupported would likely have caused the wood to split when the majority of support was gone).


With the middle removed, I could finish the corners of the ledge using the forstner drill.

After a lot of planing and sanding, the glass finally fit. #woodworking #DIY A photo posted by Anthony (@darkmidnight_diy) on Aug 9, 2016 at 5:12am PDT

The next steps are to build the legs and mount the TV.

App Update - Soundboard Version 1.7

What's New

• DTMF Tone generator
• Bug fix - playback volume level didn't change after initial set, now fixed.
• Bug fix - Text-to-Speech playback ignored the playback volume level, now fixed.

Usage

On open the user will be presented with three buttons to load the following sections. or alternatively swipe between them:

• Load files from Storage - This will load the regular soundboard as in previous versions and display the files in a list ready for playback. Note, if you swipe across to the soundboard screen from the start of the app, you will need to select Load from the options menu to populate the list.
• Generate speech from Text - This will load the text-to-speech interface, where they can enter text and play it back to inject custom phrases into their soundboard.
• DTMF Tones - This new feature allows you to generate DTMF (dual-tone multi frequency) tones - which are the noises generated when pressing the numerical buttons on a telephone keypad. Useful for, say, messing with annoying robocallers.

Support
As with all my apps, it is free, and as such, I am not in a position to offer any kind of official support, so use entirely at your own risk.
If you have any trouble with it, then feel free leave a comment or tweet and I'll try to help as and when I can, but I make no guarantees.

App Update - Bluetooth Macro Input v.1.5

What's New

• Command support - now send keystrokes for non-character keys - function keys, CTRL, ALT, etc.
• Bug fix - Bluetooth no longer connects on application load - this prevents some crashing on open. Connection happens when the first bit of text is sent.

Usage
On first run, use the menu button, select settings from the menu and set the options you wish to use.

The most important settings to choose here are "Use Bluetooth Connection" and the bluetooth MAC address for your device. If you do not set a directory for storing your macro files, the default directory is a folder called "BluetoothMacroFiles" under your devices storage location (e.g. /storage/emulated/0/BluetoothMacroFiles).

Once that's done, you can swipe between the two main screens. The first is the voice recognition screen. Tap the button, speak, wait for Google voice recognition to process your speech and a series of possible options are presented.
Tap your chosen option and the device will attempt to send that text through to the bluetooth adapter.

The second screen allows you to select a text file from the menu and send that via bluetooth. The new functionality allows you to define keystrokes for non-character keys - handy for sending commands. For example, a text file containing the following:

{F11}Hello World

will 'press' the F11 key, and then type "Hello World". The extra keys you can type in this manner are:

CTRL SHIFT ALT RIGHT_CTRL RIGHT_SHIFT RIGHT_ALT RIGHT_GUI BACKSPACE TAB RETURN ESC INSERT DELETE PAGE_UP PAGE_DOWN HOME END CAPS_LOCK

RIGHT LEFT UP DOWN F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12

The arduino sketch adapter I use with the app is detailed here, and the hardware is a Pro Micro with a simple Bluetooth-to-Serial adapter.
In order to get the command functionality working I had to amend the arduino sketch - revised version below:

void setup() {
  Serial1.begin(115200);
  Keyboard.begin();
}

void loop() {
  if (Serial1.available() > 0) {
    byte inChar = Serial1.read();
    Keyboard.write(inChar);
    Serial1.write(inChar);
    delay(10);
  }
}

Support
As with all my apps, it is free, and as such, I am not in a position to offer any kind of official support, so use entirely at your own risk.
If you have any trouble with it, then feel free leave a comment or tweet and I'll try to help as and when I can, but I make no guarantees.



Previous Versions
The original app
First update

3D Scanner

Background
So, the technique I covered in a previous post for copying 3D objects from photographs works well if the object you're trying to copy is fairly flat, but it's not really suitable for more nuanced and complex objects.

For the past few years I've been working on a game, on-and-off, and while I'm fine with the programming side of most game engines, 3D modelling is something of a downfall for me.

I am also working with non-technical people to design the game, so rather than them design characters and I then re-create them as best I can in Blender, what if I could them use real-world everyday objects to model the characters, and then scan them into a 3D mesh?


Hardware
The scanner is going to comprise of three main parts:

• The platform/turntable. Made from old bike parts, a bearing plate taken from one of those rotating laptop tables, and a windscreen wiper motor.
• The line-laser. A laser pointer and a wine glass. I will 3D print a mount for more accurate positioning.
• A camera. A simple webcam will suffice. Higher resolution the better, though to begin with I'll be working with whatever I have to hand.

Software
I am creating some image processing software for a different project (my dissertation), which has some common processes to what will be required for this, so once that's done I will be able to re-use some of the generic code for this project.

I'll be programming in Java, the webcam will be accessed using the Sarxos Webcam-Capture library, and the 3D aspects will be implemented using the JMonkeyEngine games library.

A photo posted by Anthony (@darkmidnight_diy) on Jun 3, 2016 at 8:19am PDT

Platform/Turntable

One of the key measurements for being able to create a 3D mesh from a system like this is knowing the amount of rotation. A common way to knowing this would be to use a stepper motor - each step being x degrees of rotation.

A photo posted by Anthony (@darkmidnight_diy) on Jun 11, 2016 at 9:43am PDT

As I'm using a 'dumb' windscreen wiper motor, I can't use this method. What I plan to do is use a optical rotary encoder (like the kind found in mouse scroll wheels), so that I can mark each complete rotation of the turntable.

From there, I can look at the number of webcam frames obtained, and divide 360 by the number of frames, to get the degrees per frame (this is assuming that the motor speed stays constant, as does the webcam frame rate. The motor is not variable speed, and the webcam frame rate can be controlled in software, so I don't forsee this being an issue)







Line-laser

The laser itself is a standard red laser pointer, nothing special. However for this task, I need a line, not a dot. Shining the laser through a glass stem refracts the light in such a way as to produce a line.

However the positioning is quite critical - the laser has to line up with the centre point of the turntable, and be angled through the glass so that the bottom of the line is on the turntable.



 

App Update - Soundboard Version 1.5.1

What's New

• Text-to-speech support added to enable use within the soundboard.
• Intro screen provides more detail about usage, front screen button auto loads file list on main soundboard.

Usage
 
On open the user will be presented with a two buttons, one will take them to the new Text-to-speech interface, where they can enter text and play it back to inject custom phrases into their soundboard.

The second button will load the regular soundboard as in previous versions, but will automatically load the files into the list (no need to select Load from the options menu).

It is also possible to swipe between the screens as well, so pre-recorded audio can be mixed with TTS-generated speech.

Note, if you swipe across to the soundboard screen from the start of the app, you will need to select Load from the options menu to populate the list.


Support
As with all my apps, it is free, and as such, I am not in a position to offer any kind of official support, so use entirely at your own risk.
If you have any trouble with it, then feel free leave a comment or tweet and I'll try to help as and when I can, but I make no guarantees.

New App: Soundboard

My latest Android app is now available on Google Play.

A simple soundboard application. Save some MP3 or OGG files to your phone, load up the app and play them at the touch of a button.

Tap the file names to play

To keep the sound playback levels constant, the app allows you to set a volume level independent of the current volume. On playback, the app sets the volume to that level, plays the sound clip, then returns the volume to it's previous level.

Designed to be used with phones using an adapter such as the one described in my previous post, the app also works well with Xbox Live headsets (Xbox 360), and in theory should work with any device you're capable of connecting your phones audio output to.

The app was built for and tested on an HTC One M9, but should work with any recent flavour of Android.





Usage
Initially, copy the audio files to your devices storage, into a directory called SoundboardFiles.
Open the app, hit the menu button and select load, and you'll get a list of the files as in the first screenshot above.
Go to preferences in the menu and you'll be able to choose whether or not to dynamically set the volume level on playback, and set the volume level if you so wish.

Going back to the main screen, simply tap the filenames to play the file (the app will deal with the volume adjustments automatically.

The volume control menu

If you're struggling to find audio clips to use in the 
See this post for a guide on creating sound clips from YouTube videos and other online sources.

Support
As with my other apps, it is free, with a simple ad banner at the bottom of the main screen.
As such, there is no official support, although I will respond to any comments via this site or twitter as best I can.

Audio interface for VOIP phones and XBox Live

Update
An unintentional (but useful) outcome of this project is that the connector used in this project is the same as the one used on Xbox 360 headsets, so this same device could be used to inject audio, such as a soundboard, into your in-game chat.

Original post below:
 
I got asked to build another phone audio interface for a colleague who spends a lot of time on the phone and wanted a way to play back pre-recorded audio to save repeating himself.

Unfortunately the existing one I build before is for traditional POTS (plain old telephone system), but the office uses VOIP phones.

I don't have a spare VOIP phone to mess with, so had to look at other options.

The normal headset jack

The phone has a headset port, using a 2.5mm jack socket, and the headsets plug has 3 rings. Given the the headsets themselves consist of just a microphone and earpiece, it stands to reason the pinouts are mic, speaker, and ground.

I don't have the actual pinout for this particular brand of headset, but I have worked with similar ones in the past and typically the tip is the microphone, ring is speaker, and base is ground.

I don't have one of those connectors to hand, but found a stereo headset one from an old hands-free kit. That it has an additional ring connection (for the 2nd audio channel) doesn't matter, it'll effectively join up with ground anyway.

In addition to being able to inject audio into the call, we still need to be able to use the phone normally, so I've used an XBox 360 controllers headphone port to provide a passthrough for the phone headset.

The quick hand-drawn wiring diagram I used. An artist I am not.

Testing this circuit revealed a slight problem, having both the audio source and microphone connected resulted in the microphone becoming inaudibly quiet. In hindsight, this is likely due to the audio source being amplified and the mic not. A simple switch added to the circuit to allow quick switching fixed that.

Adding a simple switch at this point sorted the problem.

The finished adapter in the obligatory tic-tac box